A more beautiful Beast

Editor’s note: It’s been a while since I’ve written an article here, I know. It’s been a rough time for all of us, and I’ve been having some difficulty adjusting to everything. I’m doing fine, all things considered. When this all started, I thought it would be nice to spend some time indoors and focus on personal projects for a few weeks, and then things would get back to normal.

Yeah, about that. It’s been four months, and things aren’t looking like they are going to get back to normal any time soon. The pandemic has us all stressed out and even those of us who have a lot of time on our hands are finding it hard to concentrate on anything. While my mental health has probably suffered a little, I’m still lucky in a lot of ways in that I have a stable job that I can do from home, and I haven’t had any close friends or family come down with COVID-19. A lot of people are struggling hard right now, between a global pandemic and all the racism and political issues we are dealing with — issues that have always been there, but have been boiling over these past couple of months. It’s a stressful time for all of us, but it’s also a time when it is important try to be good to each other. Be nice, okay?

Except to fascists, they suck.

*********************************************

Ah, scale creep. It’s a common thing in the world of miniature gaming – a company will start out by making their figures in a certain scale, but eventually the temptation to start models that are a little bigger and have a bit more presence on the table will kick in. It’s not necessarily bad – bigger, cooler, better-looking models are objectively a good thing – but for people with large collections, seeing the old next to the new can make the old models look bad.

Warmachine is no stranger to this issue. When they first launched the game, it was all metal models because plastic is for people who don’t have testicles or something. At least, that’s what it said on Page 5. These metal models may have been fine for the time, but next to newer plastic and resin releases, they look tiny and kind of… pathetic.

page5.png

Wow. This aged terribly, and given that 2003 wasn’t that long ago, it probably sucked when it was new as well.

Unfortunately, not every model in their catalogue has been updated. In some cases, the community adapted. Guides existed online for enterprising Khador players to make a better-looking Behemoth out of various parts from the Privateer Press bits store, though PP did eventually come up with a resculpt. However, there remains one warjack in the Khador stable that desperately needs a resculpt – that is Beast 09, Sorscha’s character warjack.

Beauty and the Beast

Beast 09 is supposed to be a badass. An aggressive, ruthless, killing machine that strikes fear into the hearts of anyone in its path. With a giant axe, it cuts swaths through flesh and metal enemies alike, wrecking anyone and anything that gets in its way. Unfortunately, these qualities do not carry through into the model when you place it on the tabletop.

Beast_09.jpg

See how badass he looks in the official art?

There are two issues here, namely that the sculpt that had some problems back in the day, and it did not age well in the twelve or so years since it was released. Like many of the old metal warjacks, as soon as the first plastic warjacks came out, they immediately looked tiny, obsolete, and not very intimidating on the tabletop. These issues are compounded by the fact that the pose is very squat and not very dynamic, with the knees bent, making it look even shorter than it actually is. And… is it just me or is it weird that the axe has an icicle hanging off of it? You would think the icicle would immediately break off as soon as you swing it, especially that swing connects with a Cygnaran warjack.

33055_BeastO9_WEB

This sculpt isn’t horrible on its own, aside from the dumpy pose, but next to any other warjack, Beast-09 looks more like Beast-0.9

Like with the old Extremoth, the answer to this issue is a conversion. Sure, you can probably do a conversion using a regular Juggernaut kit, but this is Beast 09 we are talking about here – as a character warjack, it should have more table presence than your regular, non-character warjacks. Using an Extreme Juggernaut as a base, you can make something that, in the absence of a huge-based model, can be a centerpiece of your army.

What you will need

For this project, you will need a few things. Since Beast 09 is basically an upgraded Juggernaut, the Extreme Juggernaut (PIP 33115) is a natural starting point. In addition, you will need a few bits from your collection or the PP bits store. These include:

Black Ivan upgrade kit (PIP 33087) – you will need two spiked shoulder pieces as well as two of the claw bodies. Each kit comes with two of the shoulder pieces and one of the claw bodies, so you might be better off just buying two of these these kits and throw the leftover parts in your stash of bits.

Torch upgrade kit (PIP 33082) – the medal on Torch’s chest makes a good stand-in for Beast’s decorations; this is something you can probably get from the bits store though, unless you need the other parts for another project.

Spikes – when you are trying to make a warjack look badass, festooning it with spikes is a good idea. I used ones from my stash, but I think they were a couple Berserker spikes from the old metal sculpt and a sprue of metal Drago spikes. They’re just good to have around in your bits box, and adding a few bucks worth of spikes to your PP orders once the bits store reopens is a good way to source them.

In addition to your usual tools for working with metal warjacks, like a pin vise, drill bits, and glue, you will also need some basic sculpting and scratchbuilding supplies. These include:

Some brass rods and tubes

Plasticard/sheet styrene of various thicknesses

Meng rivet setthese are good for adding or replacing rivets, and are useful in a lot of conversions like this. Simply shave off the rivet from the plastic sheet with a knife and glue it onto the model.

Putty – I recommend Apoxie Sculpt as it is more easily workable than Milliput, but files and sands a lot better than green stuff or brown stuff

Tools – files, sanding sticks, and a saw.

Don’t Skip Leg Day

It’s natural to want to start with the legs, and one of the first things you will notice when you do so is that Beast 09 has some additional details on the legs not present on the juggernaut. Fortunately, you can add most of this detail with sheet styrene. Simply take some thin pieces, cut them roughly to shape, and glue them to the plate. Then, using a knife and some files, remove the excess overhang over the edges of the armour plate. Finally, add some rivets.

The tow rings can be added by taking a piece of plastic tube, cutting a small piece off the end, and sanding down the edges so it resmebles more a donut than a section of pipe. Glue that on, then simply sculpt a little ring to hold it on.

On the center plate, start by filing it flat. Some small bits of styrene tube can be used for the edges, and you can cut the runes on the plaque out of sheet styrene. The same process as we used on the thigh pieces can be used for the row of armour plate on the bottom, and more rivets can be added.

legs

On the back, you will also notice that in place of the butt-flap armour plate, Beast 09 has some square chunky parts. I built these up with thick pieces of plasticard, then filed and sanded it into shape. After attaching it to the body with super glue, I filled in the gap with Apoxie Sculpt and smoothed it out. This may not be necessary because it’s hardly noticeable, but I think it’s a nice touch.

butts

Warjack butts. L-R: Studio Juggernaut, Studio Beast 09, and my conversion. Sorry, I forgot to get a pre-primer shot.

Also, I did some work to change the pose of mine in order to make it more dynamic, balancing the entire model on the ball of one foot as though it was charging forwards. You don’t have to do this, but if you do, make sure it is securely pinned not only to the base, but that the foot is securely pinned to the leg.

Torso Time

The torso on Beast 09 has a few distinctive elements that we want to add. Most distinctive are the additional spikes in the shoulder area. The shoulder spikes from Black Ivan make a good substitute, though there are a few things you need to do to get them to fit nicely. Since the Black Ivan spikes are located using the rivets that are molded into the body, I find the best way to line them up is to use one of the rivets to locate them and file the rest off as they won’t line up with Black Ivan’s. The curve doesn’t quite match, so there will be some filing and putty work to blend these spikes into the rest of the body. Finally, the armour plate that these spikes are attached to on Black Ivan has rounded edges, while Beast is much more square. To address this, you can build up the corners with Apoxie Sculpt, filling out the rounded edges, then file them back down so they are square as opposed to rounded.

While you have the Apoxie Sculpt out, it’s also a good time to deal with the plaque around the neck that has the symbols on it. Simply use your putty build up the collar area, then once it dries and you have it sanded smooth, you can use small plasticard rods to make the edges. Then, carve some runes into the plaque using your scribing tool of choice. For the medal, I simply used Torch’s medal and made a couple ribbons out of plasticard, then pinned it in place on what would be the chest area.

Finally, Beast 09 has the Khador symbol on that top piece of armour plate. I didn’t want to try sculpting it, so instead I threw on some of Drago’s spikes so I would at least have something cool there and it wouldn’t be blank, and I think it definitely looks more intimidating than the original. I also didn’t bother with the additional detail on the smoke stacks, as I didn’t have a particularly good way to make six identical curved pipes for the exhaust tips and thought it looked good enough without them.

torso

To Arms!

If you want, you can probably get away with simply using the arms that came in the Extreme Juggernaut kit, but I didn’t think they looked quite right. The Extreme Juggernaut has some very rounded elements to the armour plate on its arms, while Beast is a little more square and boxy looking. We can address this be replacing the hand parts from the Extreme Juggernaut with the claw body of Black Ivan.

First, you will need to remove a section of Black Ivan’s claws, using a saw and a file to get rid of it. Then, pin the claws of Black Ivan to the forearms of the Juggernaut. This will look a little weird as the forearms are rounded but the claws or square, but you can fix that with putty – on the armour plate on the Juggy next to where it meets up with the claws, build up the rounded areas where the corners should be, then file and sand it back down in a more square shape. Add some rivets and maybe a spike, and you’re in business.

Finally, pin the fingers of the Juggy in place onto the claw body of Black Ivan. These fit decently as they are about the same size as Black Ivan’s claw fingers, however it will need a little bit of putty to make them mate up properly.

Axe to face!

Since I wasn’t a fan of the icicles on the original Beast 09 sculpt, all I had to do with the axe was extend the shaft a little to represent the 2” reach on Beast as opposed to the 1” reach of the Juggernaut. Remove the existing shaft, and replace with brass tube – it’s a pretty simple conversion, and it will give you the added benefit of a straighter, stiffer axe shaft that is less likely to get bent or broken. In addition to using a second tube to incorporate a bit of detail, I made sure to drill all the way through the axe head and allow the shaft to poke through the top of the axe a little, just to make it look a little more interesting.

axe

Final steps

That’s it for the conversion process; the rest is just assembly. Since the shoulders, elbows and waist are ball-jointed, you do have some flexibility in the pose. I find that, like with many warjacks, it’s a little easier do a sub-assembly, with a pin in the waist, so you can paint the legs separately. From there, it’s just a matter of priming, painting and basing, which I did using my usual techniques plus some playing around with oil paints.

Conclusion

Without a doubt, Beast 09 is the Khador model that is the most badly needs a resculpt. I was hoping we might get one when they released Sorscha3 and the new Man-O-War models, but sadly, it was not to be. Fortunately, it’s something you can do on your own with an Extreme Juggernaut, some spare parts, and some basic scratchbuilding skills.

IMG_E2715.JPG

One of these things is more extreme than the other…

 

Bonus Content: Léa

Lately, I’ve been playing around with doing figures in unusual light settings, such as at night with some sort of OSL as the main light source. This is my first try at doing it on a large-scale model such as a bust.

The model itself is from Ouroborous Miniatures Exquis kickstarter. Exquis was a series of busts of normal, modern-day women, which I went in on for Léa and Yon. The subjects were interesting and unique, the sculpts were good, and the casting was the quality I expect for a resin display model — some small mold lines to clean up, but overall pretty good. I was most impressed with the turnaround time on the kickstarter. If I remember correctly, I got my product only a couple months after the kickstarter closed, which is a pretty impressive turnaround time. I’d have no qualms about recommending Ouroborous Miniatures kickstarters in the future, as you’re not going to end up waiting for a while unlike certain failed kickstarter projects.

Anyways, this sculpt spoke to me the story of a lost girl or a runaway, so I decided to paint her as though she is lit by a streetlight at night. To set the scene, I built a backdrop, painted it black, and stippled on some a little bit of light everywhere but directly behind her, which would be in her shadow.

I think it turned out fairly well — it’s probably not perfect, but it’s also the first time I’ve done something like this. I’ll definitely be playing with this sort of thing some more, though in the meantime I have some other challenging projects on the go so I probably won’t return to it for a little while.