Reporting back from Torcan 2019

This past weekend was Torcan 2019, a large model show held in Brampton by Peel Scale Modelers. In terms of scale model shows, I would consider this to be one of the big three in the region. It’s not quite as big as HeritageCon or CapCon, and doesn’t have the same really cool venue as these other two, but it’s still a large show that is definitely worth the trip.

It was a long drive, and, after consuming more peameal bacon than I have ever seen in one place before in Oshawa, I made it to the show around 10:00. Parking was a challenge at the venue, but I managed to find a spot at a school next door. This proved to be problematic at the end of the day, when I had to run through torrential rain to retrieve my vehicle. Fortunately, I had the foresight to bring one more change of clothes than I thought I would need and I was able to dry myself off a little, so it wasn’t too bad.

The vendor hall was well stocked; it was basically a hockey rink with four rows of tables running the length of the rink. There were plenty of dealers selling models, as well as a few selling tools, shirts, and other modelling accessories. Since it was mostly focused on the traditional stuff and I’m trying to be good, I didn’t buy any models, however I did stop by the vendor that had all the Green Stuff World and Flex-i-file products and picked up the third set of GSW colour shift paints and the Goodman Models super sanding blocks.

I also liked how they did the awards ceremonies. During the show, they snapped photos of the models and quickly put pictures of the winners and a listing of the top three into the powerpoint presentation. While reading the judges’ handwriting was clearly the weak link in this process, it made the awards ceremonies a lot more entertaining when you get that visual reminder of the cool models on the table and get to see the winners again.

One thing that I did really appreciate was the growth in the figures category from last year. Competition was much fiercer, both in terms of the number of models on the table and the quality. There were about 45 entries, with particularly tough competition in busts and sci-fi/fantasy. With somewhere around 430 entries, figures represented 10% of the models on the table, which is actually pretty good as these sorts of shows are traditionally dominated by the three A’s – aircraft, armour, and automotive. Quality was also up there this year, with some very accomplished painters entering and a large portion of the models on the table being what I would consider to be seriously competitive.

I think the simplest way to illustrate my point would be to note that my entries this year were a lot better than my entries last year, but I didn’t take home as many shiny gold medals. While I was debating for a while whether to make the drive or not this year, the increase in participation in the figures category has really pushed this show from a maybe into an annual thing for me.

Things that caught my eye

Of course, there were a number of models in the show that caught my eye and deserve special attention. Starting with the juniors, there was one kid who was clearly a natural at car modelling; according to the sheet, this Chevy Nova with the yellow to black fade was his first model.

IMG_1610.JPG

In figures, this Cap’n Sapo bust beat me out for gold in the busts category, and took home best figure. It was a neat mix of texture, with the frog skin, leather, eyeballs, and a little bit of armour plate on the shoulders creating some nice contrast across the model, and all of these textures were rendered masterfully. It also bore an unfortunate resemblance to a certain popular nazi meme, but I’m assuming that was just a coincidence.

IMG_1601.JPG

In sci-fi, there was a really neat looking dieselpunk spacecraft thing. It was cool, it was yellow, and according to the sheet, it was all scratchbuilt. Which was awesome.

IMG_1685.JPG

The Nuka Cola building was my vote for the people’s choice award. Though it had no figures and no vehicles, it was very detailed and evocative of the world of Fallout. Or what I imagine the world of Fallout to be; my only real experience with Fallout is watching The Final Pam on Monster Factory.

I wasn’t the only person who did a Bf.109B. Someone also did one, using an older kit from a different manufacturer and painting it up in the more traditional colour scheme of the fascist forces in Spain.

IMG_1616.JPG

It’s often hard for me to pick out what stands out in the world of armour because tanks tend to be not very colourful and often splattered with the same colours of mud and dirt. But for my money, the little SU-18 assault gun, which looks like a 76mm gun slapped on an FT-17 tank, was just a neat subject and was very well done.

IMG_1687.JPG

For the Gundams, I spent a lot of time staring at a fellow club member’s ball. This extensively modified MG ball kit was painted with inspiration from the Watchmen, and was a great illustration of how far you can take a gundam kit with realistic weathering, battle damage, etc.

Finally, in space and sci fi, I saw someone brought one of those Warhammer 40K walkers. I don’t remember how well it did, but I just thought it was nice to see some stuff from the Warhammer universe on the tables, even if 90% of the models from 40K aren’t really my jam.

IMG_1675.JPG

Results

I think before I get into this section, it is important to note that these contests aren’t just about who brings home the hardware, and that sort of overly competitive mentality is something that we all need to consciously avoid in order to keep our hobby fun and welcoming.

That said, even though the competition in figures was a lot more intense this year, I still did fairly well. I took Silver and Bronze in the busts category, with Amy Johnson and Nancy Steelpunch, respectively, losing out to the aforementioned Cap’n Sapo and pushing my Sorscha bust out of the top three. In the regular sci-fi/fantasy category, little Sorscha won me a gold, edging out some sort of space marine. Further, I took home the theme award for figures, with Nancy representing the best “Bent, Broken and Wounded” model with her steampunk mechano-hand.

In the non-figure categories, my Spanish Republican captured Bf.109 took home a silver in the Out Of Box category, losing out to a fellow IPMS Ottawa member’s MiG-31. This was actually the entry that I was most interested in because I was curious as to what the reaction would be. It is very much an illustration of what happens when a figure painter tries out aircraft and very much outside of the predominant style for model aircraft.

My two Gundam entries, my Ball and my SD, also won golds in their categories. Again, these aren’t in the traditional style of gunpla builders, being simple, out of the box kits that were competently assembled, but with a lot of effort focused on the interaction of light and shadow and freehand painting, whereas most gunpla competitons heavily weigh modifications, kitbashing, and flashy LED lighting. However, the painting must have impressed the judges, because they both won their categories.

IMG_1668.JPG

For those of you keeping score, Ottawa balls actually did pretty well in the Gundam section, with two balls made by Gunpla Ottawa members winning their categories, and the other one winning best overall in the Gundam division.

Finally, I had some extra room in my case, and remembered someone brought an entire 15mm Roman army last year, so I decided to drag some pieces from my Khador and Cygnar warmachine armies to enter into the collections, and came away with a silver and a bronze, respectively.

I also did fairly well in the raffle department, coming home with a Tamiya motorcycle kit and a couple small ships. Neither of these are the sort of things that I would have actually bought given the option, however I think they will both make for interesting challenges in the future.

IMG_1696.JPG

Just so long as I don’t have to buy any 1:700 scale photoetch.

(for another review of the show, check out ModelAirplaneMaker’s report here)

Bonus: random photodump of cool models!

 

2 thoughts on “Reporting back from Torcan 2019

  1. Thanks for the kind comments on the show. I’m glad to see that people still appreciate all the work people go to enter a contest for the sake of entering same, not just to see if they can win medals (although that always a great side benefit!).

    Like

  2. Excellent writeup! I agree on the quality of the models on display – it was a real treat to see the variety of models on display. The Fallout building made me do a double take as I walked by. It was so detailed – even the “trash” was fallout worthy. I hope we run into each other at CapCon

    Like

Leave a Reply to ModelAirplaneMaker Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s