Yep, it’s true. The one thing that annoys me about miniature painting is painting horses. I’m not good at it and I don’t enjoy it. So, last year, when Privateer Press announced that their new releases for Khador would be chariots, I was initially a little disappointed, because that meant I would have to paint up some horses.
Fortunately, the part of my brain that thinks of dumb conversion ideas rescued me from this fate and decided to instead deliver me from the frying pan of painting horses and into the fire of expensive, possibly ill-conceived conversions.
I’m not sure where the inspiration came from, to be honest, but one of my miniature painting weaknesses is that once I get an idea for a conversion in my head, it’s hard to shake it until it’s done. So, Siege Strider it was. And, since I’m a glutton for punishment and a completionist when it comes to my Khador collection, I needed to make two Siege Striders.
Of course, the first thing I needed to do was source the parts. Basically, this a kitbash of two boxes, the Siege Chariot and the Storm Strider. I used the legs and lower body of the Storm Strider, combined with everything but the horses on the Chariots. Also, a random assortment of plasticard sheets and tubes, which are very useful when doing these very mechanical conversions.
I ended up using a few different glues and putties. I used brown stuff for general filling work, but switched to milliput for areas that I was going to need to sand to make smooth, flat surfaces. Finally, I also used a bit of “sprue goo” — that is, some plastic sprues dissolved in Tamiya Extra Thin — to fill gaps and glue together pieces of plasticard that weren’t quite coming together perfectly.
Finally, I got a pack of rivets and bolt heads from my local hobby shop. These are made by Meng primarily for automotive dioramas and come in various sizes. Simply shave them off the flat plastic piece they come on with a scalpel and glue them to the model. The advantage to this over doing something like dots of glue is that you get a uniform rivet size, which is close enough to what makes sense, especially when you need to add 263 rivets…
While the legs were the most important part of this conversion, there were a few things that needed to be done on the chariot. First, since we aren’t going to need wheels on this thing, I filled in the wheel wells with putty and plasticard and sanded them smooth, after which, I continued the line of rivets along the bottom of the side all the way across where the wheel well was.
I was left with the area where the axles for the wheels go in, and while I could have removed them as well, I decided on a different approach. I scratchbuilt a series of tubes out of plasticard tubes, putty, and those Meng rivets and connected them to the outriggers. The ends of the outriggers were cut off and replaced with some more tube stock, modified to turn them into exhaust pipes. With that done, I removed the attachment for the tow bar and filed that area smooth, and added a thick piece of flat plasticard to the bottom where it attaches to the legs.
Apart from that, it all went together in a pretty standard fashion, with some cleanup on the resin parts and some pinning. For ease of painting, I left the driver, shield, and gun in separate sub-assemblies to be done later.
The legs were from the Storm Strider, but they had to be heavily modified to remove some of the Cygnaran influence. Cygnar models tend to be very rounded and often feature plasma conduits and electrical doodads. Khador has a more utilitarian feel, with more sharp corners and boxy shapes and tends to resort to raw power more than fancy electro-weapons. While most of the legs could have passed for any of the main Warmachine factions, the feet of the Storm Strider were distinctly Cygnar.
So, the first thing I did was shave and file off the little electro-pimples, because those just don’t fit in Khador. With those out of the way, it was time to scratchbuild some armour plate to go overtop of the existing filed-down feet. I started by playing around with some paper and cardboard, cutting and folding until I figured out the shape that I wanted. Once I got that sorted out, I made a template out of cardboard, from which I could cut out pieces of styrene. These were then scored and folded along the edges and roughly glued together using sprue goo.
Once I had the basic shape of the armour, I used plenty of putty and glue to attach it to the legs, covering up what remained of the rounded parts. I also made some covers for the top part, again out of plasticard. All this plastic origami ended up giving me the basic shape if what I wanted, and after backfilling it with milliput, I was able to file and sand down the rough edges to get the shape just right.
From there, I had to add some surface detail. So, I printed off some Khador symbols and traced them onto a piece of plasticard, then cut them to shape. Finally, I festooned the edges with rivets to add that Khador industrial feel.
With the feet done, it was just a matter of pinning and gluing everything together. I also had to scratchbuild some pipes, pistons and tubes in between the center section where all the legs come together and the body of the chariot in order to raise it up so the legs nicely clear the body.
With all the conversion work done, it was time to paint. For this project, I chose to paint in sub-assemblies, with the legs, body, driver, gun and shield being separate parts to be joined later. I did a zenithal prime with black and white Stynylrez, then sprayed some sections in pink, masked off a couple feet and a couple stripes, then brought out the purple. As usual, highlights and shade colours were applied to accentuate the contours of the model, using the same colours as the rest of my Khador army which I have discussed many times on this blog. From there, it was a matter of brush painting all the rest, adding weathering, and putting it all together.
Did I mention that I don’t like painting horses? Well, I don’t, and thanks to some scratchbuilding and some crazy ideas, I ended up with something unique and cool. And, with some of the spare parts, I was able to make a couple neat terrain pieces that can be used in narrative scenarios or simply to spruce up your battlefield.